775 654 443

Five signs your gutters need repair

Icicles hanging from a gutter in winter

Gutters do not fail all at once. Between the first small thing and a wet wall there are usually several seasons in which a repair would have cost a fraction of what comes later. These are five things you can see from the ground.

1. A wet vertical stripe on the facade

A stripe that dries more slowly than its surroundings after rain, usually under a gutter joint or under an outlet. It means a leaking joint or overflow across the outer edge. If the stripe shows only after a downpour, capacity or a clogged gutter is normally to blame. If it shows after every shower, it is the joint.

2. Standing water in the gutter

Look from a ladder or an upstairs window the day after rain. If water stands in the gutter, the fall is missing. The cause is usually a loose or corroded bracket that has dropped. Standing water speeds up corrosion from the inside, so a gutter that would otherwise last a long time reaches the end sooner.

3. Icicles always in the same place

Icicles along the whole length are normal in winter. The same spot every time is not. It means water stands there, or drains more slowly than elsewhere. Combined with clogging it forms an ice plug, which splits the downpipe.

4. A damp or flaking plinth

When the plinth is permanently damp and the render peels near the ground, the usual cause is a missing or badly aimed downpipe shoe sending water straight at the wall. It looks like a render fault in a photo, but the cause is four metres higher up.

5. A gutter that visibly sags

Look along the eaves edge from the side of the building. A gutter that dips visibly somewhere has a loose bracket or a rotten fascia board beneath it. The important thing here is not to fix only the bracket: there is nothing to anchor into rotten timber, and in a year it is back.

What can be put right without replacement

All of it, as long as the metal as a whole is sound. Replacing brackets, lapping a joint, clearing out, adding a shoe or swapping a damaged bend are ordinary local repairs. Replacement makes sense only once the metal is perforated along its whole length, or when the material was chosen into the wrong company of metals from the start.

More on the Gutter repairs page.

Back to the blog

Describe the job

A few sentences and the location are enough. We read every enquiry and pass it to a sheet metal firm that works in your area. If we have nobody there, we tell you straight away.